MOST ACCURATE TIME COUNTER

HERE I POSTING THE LADDER LOGIX OF HOUR MINIUTE SECOND COUNTER OF ANY RUNNING SYSTEM IN ROCKWELL 5000 SYSTEM WHICH IS MOST ACCURATE IN THE WORLDclock routine

Contactors : ELECTROMECHANICAL RELAYS

                      Contactors : ELECTROMECHANICAL RELAYS

IP - Ingress Protection Ratings NEED For enclosures

IP - Ingress Protection Ratings

IP - Ingress Protection rating is used to specify the environmental protection - electrical enclosure - of electrical equipment

Sponsored Links

Ingress Protection (IP) ratings are developed by the European Committee for Electro Technical Standardization (CENELEC) (NEMA IEC 60529 Degrees of Protection Provided by Enclosures - IP Code), specifying the environmental protection the enclosure provides.

The IP rating normally has two (or three) numbers:

1. Protection from solid objects or materials
2. Protection from liquids (water)
3. Protection against mechanical impacts (commonly omitted, the third number is not a part of IEC 60529)

Example - IP Rating

With the IP rating IP 54, 5 describes the level of protection from solid objects and 4 describes the level of protection from liquids.

An "X" can used for one of the digits if there is only one class of protection, i.e. IPX1 which addresses protection against vertically falling drops of water e.g. condensation..

IP First number - Protection against solid objects

0	No special protection
1	Protected against solid objects over 50 mm, e.g. accidental touch by persons hands.
2	Protected against solid objects over 12 mm, e.g. persons fingers.
3	Protected against solid objects over 2.5 mm (tools and wires).
4	Protected against solid objects over 1 mm (tools, wires, and small wires).
5	Protected against dust limited ingress (no harmful deposit).
6	Totally protected against dust.

IP Second number - Protection against liquids

0	No protection.
1	Protection against vertically falling drops of water e.g. condensation.
2	Protection against direct sprays of water up to 15o from the vertical.
3	Protected against direct sprays of water up to 60o from the vertical.
4	Protection against water sprayed from all directions - limited ingress permitted.
5	Protected against low pressure jets of water from all directions - limited ingress.
6	Protected against temporary flooding of water, e.g. for use on ship decks - limited ingress permitted.
7	Protected against the effect of immersion between 15 cm and 1 m.
8	Protects against long periods of immersion under pressure.

IP Third number - Protection against mechanical impacts (commonly omitted, the third number is not a part of IEC 60529)

0	No protection.
1	Protects against impact of 0.225 joule (e.g. 150 g weight falling from 15 cm height).
2	Protected against impact of 0.375 joule (e.g. 250 g weight falling from 15 cm height).
3	Protected against impact of 0.5 joule (e.g. 250 g weight falling from 20 cm height).
4	Protected against impact of 2.0 joule (e.g. 500 g weight falling from 40 cm height).
5	Protected against impact of 6.0 joule (e.g. 1.5 kg weight falling from 40 cm height).
6	Protected against impact of 20.0 joule (e.g. 5 kg weight falling from 40 cm height).

In order to comply with the stringent requirements for CE Marking machine makers today fits their machines with parts certified according EU (European Union) and international standards.

see also

http://www.mediafire.com/view/?ruandbuukbpnng6

Safety PLC

plc output

PLC Outputs

REVIEW THE BASICS OF PLC

PLC Control for Rotary Bottle Washing Machine

PLC Control for Rotary Bottle Washing Machine

UnLock YOur Rock and Siemens

WHATS YOUR KEY

WHAT IS ANOTHER KEY

Be Cautious Wrong Key or Abuse may damage your software or may not work properly....

Be patient and work with help file. plz comment for any other requirement. 

Earn pocket money When You Expense Money, or in FRee Time

STAR-DELTA

HERE IS YOUR AUTO CAD 2008

LINKS     

1. PART1
2. PART2
3. PART3
4. PART4
5. PART5
6. PART6

LEARNING RA Logix5000

 Here your practice Mate download start Programming
    Emulators are Here

SIEMENS HELPPOINT

hi guys this is Day 1 of my blog here  i am going share some link which been customized by me to get everything under one rooftop on in a single package of SIEMENS step 7 Solutions for who are learning plc programming.
here are the links
                      Siemens Step 7 5.5 1) part4
                                                    2) part3
                                                    3) part2
                                                    1) part1
                    SIEMENS PLC simulator Here


HEY GET Your SCADA DEVELOPING KIT
                               Here          
                         

   1) part12   2) part11    3) part10   4) part 9   5) part8 
6) part7 7) part6  8) part5    9) part4 10) part3
 11) part2 12) part1